Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • ANC-T & ANC-TG Image

Effective August 21st, 2023, the Naval Air Warfare Center Aircraft Division (NAWCAD) has disapproved Timken Aurora’s qualification status for SAE-AS81820 and SAE-AS81935 specifications. Timken Aurora is working diligently to get requalified.

  • Ball - 440C stainless steel per AMS 5630 - heat treated.
  • Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ANC-3TC)
  • Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
  • Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: ANC-3TP/ANC-3TE)
  • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
  • Temperature Range: -65°F to + 325°F.
  • "K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
  • Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: ANC-3TD1/ANC-3TD2)
  • Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14101 (grooved) and AS14104 (plain), and are approved for procurement under these specifications.
801 - 828 of 828 | Results Per Page | View | Unit of Measure
« 16 17 
Request Information Compare Items Add to CAD Cart
Clear Filter

Bearing Type

B - Ball Bore (in)

Radial Static Limit Load Capacity

Part Number

Bearing Type

B - Ball Bore

D - Outside Diameter

W - Ball Width

H - Race Width

O - Ball Shoulder Diameter

a - Misalignment Angle

Radial Static Limit Load Capacity

CAD

N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
N/A Plain N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD Icon (for items table)
801 - 828 of 828 | Results Per Page | View | Unit of Measure
« 16 17