3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

N/A 165.10 mm6.50 in

Dimension D

N/A 203.200 mm8.000 in

Dimension C/B

N/A 76.20 mm3.00 in

Specifications

Static Load Rating Co

N/A 1050 kN237000 lbf
Dynamic Load Rating C11 N/A 452 kN102000 lbf
Geometry Factor Cg2 N/A 0.1539

Speed Ratings - Oil

N/A 2000 rpm

Speed Ratings - Grease

N/A 1800 rpm

Weight

N/A 12.310 lb5.582 Kg

Mounting Data

Chamfer rsmin

N/A 3.05 mm0.12 in

Max. Mounting Dimensions Clearance Fit 1

N/A 165.10 mm6.50 in

Min. Mounting Dimensions Clearance Fit 1

N/A 165.075 mm6.4990 in

Max. Mounting Dimensions Clearance Fit 2

N/A 203.246 mm8.0018 in

Min. Mounting Dimensions Clearance Fit 2

N/A 203.200 mm8.000 in

Max. Mounting Dimensions Tight Transition Fit S

N/A 165.059 mm6.4984 in

Min. Mounting Dimensions Tight Transition Fit S

N/A 165.034 mm6.4974 in

Max. Mounting Dimensions Tight Transition Fit H

N/A 203.139 mm7.9976 in

Min. Mounting Dimensions Tight Transition Fit H

N/A 203.185 mm7.9994 in

Shoulder Diameter Da

N/A 188.91 mm7.438 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-8810448
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.