3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

N/A 152.40 mm6.00 in

Dimension D

N/A 190.500 mm7.500 in

Dimension C/B

N/A 63.50 mm2.50 in

Specifications

Static Load Rating Co

N/A 777 kN175000 lbf
Dynamic Load Rating C11 N/A 364 kN81800 lbf
Geometry Factor Cg2 N/A 0.1384

Speed Ratings - Oil

N/A 2300 rpm

Speed Ratings - Grease

N/A 2000 rpm

Weight

N/A 9.557 lb4.335 Kg

Mounting Data

Chamfer rsmin

N/A 3.05 mm0.12 in

Max. Mounting Dimensions Clearance Fit 1

N/A 152.40 mm6.00 in

Min. Mounting Dimensions Clearance Fit 1

N/A 152.375 mm5.9990 in

Max. Mounting Dimensions Clearance Fit 2

N/A 190.546 mm7.5018 in

Min. Mounting Dimensions Clearance Fit 2

N/A 190.500 mm7.500 in

Max. Mounting Dimensions Tight Transition Fit S

N/A 152.359 mm5.9984 in

Min. Mounting Dimensions Tight Transition Fit S

N/A 152.334 mm5.9974 in

Max. Mounting Dimensions Tight Transition Fit H

N/A 190.439 mm7.4976 in

Min. Mounting Dimensions Tight Transition Fit H

N/A 190.485 mm7.4994 in

Shoulder Diameter Da

N/A 176.21 mm6.938 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-809640
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.