Batch CAD Cart (0)
  • Cart is empty
Unit of Measure

Specifications

Design Units

N/A Metric

d - Bore

N/A 670 mm

Type

N/A NU

Dimensions

D - Outer Diameter

N/A 980 mm38.5827 in

C - Inner Ring Width

N/A 180 mm7.0866 in

B - Outer Ring Width

N/A 180 mm7.0866 in

Basic Load Ratings

C0 - Static Radial Rating

N/A 11100000 N2500000 lbf
C - Dynamic Radial Rating1 N/A 6170000 N1390000 lbf

Factors

Reference Thermal Speed Rating (Grease)

N/A 210 rpm
Reference Thermal Speed Rating (Oil)2 N/A 230 rpm
Cg - Geometry Factor3 N/A 0.3527

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius4 N/A 6 mm0.200 in
r - Outer Ring "To Clear" Radius5 N/A 6 mm0.2 in

da - Inner Ring Backing Diameter

N/A 730 mm28.7000 in
  • 1 Based on 1 X 106 L10 life for the ISO life calculation method.
  • 2 See thermal speed ratings in the engineering section.
  • 3 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 4 Maximum housing fillet radius that bearing corners will clear.
  • 5 Maximum shaft fillet radius that bearing corners will clear.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.