2TS-DM assemblies are comprised of two single-row bearings with abutting back facing inner rings and an outer ring spacer with lubricating holes is typical. These are generally used at fixed positions on rotating shaft applications.

Design Attributes:
  • Two single row bearings, with or without a spacer
  • When spacers are used, bearing is furnished as a preset, matched assembly
  • Spacers available with or without lubricant grooves and holes
    • Request Information
    Unit of Measure

    Other Dimensions

    Weight

    		 N/A 14.51 Kg31.96 lb

    Width (T)

    		 N/A 1.5626 in39.69 mm

    B - Width

    		 N/A 1.5626 in39.69 mm
    Max Shaft Fillet Radius1 N/A 0.01 in0.30 mm
    Max Housing Fillet Radius2 N/A 0.06 in1.52 mm

    Shaft Backing Shoulder Diameter - Backface (db)

    		 N/A 1.12 in28.5 mm

    Housing Backing Shoulder Diameter - Frontface (Da)

    		 N/A 1.81 in45.97 mm

    Key Dimensions

    Cone Part Number

    		 N/A 12580

    Cup Part Number

    		 N/A 12520

    Related Assembly Number(s)

    		 N/A 12580-90025 12580-90026

    Outer Spacer Part Number

    		 N/A Y1S-12520

    Design Unit

    		 N/A Inch

    Bore (d)

    		 N/A 0.8125 in20.638 mm

    O.D. (D)

    		 N/A 1.9380 in49.225 mm
    Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 2540 lbf11300 N
    Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 4430 lbf19700 N
    K Factor 5 N/A 1.81
    e Factor 6 N/A 0.32

    Ratings

    C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 17100 lbf76000 N
    Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 1410 lbf6260 N

    Factors

    Y1 Factor 9 N/A 2.09
    Y2 Factor 10 N/A 3.11
    • 1 These maximum fillet radii will be cleared by the bearing corners.
    • 2 These maximum fillet radii will be cleared by the bearing corners.
    • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
    • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
    • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
    • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
    • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.