2TS-DM assemblies are comprised of two single-row bearings with abutting back facing inner rings and an outer ring spacer with lubricating holes is typical. These are generally used at fixed positions on rotating shaft applications.

Design Attributes:
  • Two single row bearings, with or without a spacer
  • When spacers are used, bearing is furnished as a preset, matched assembly
  • Spacers available with or without lubricant grooves and holes
    • Request Information
    Unit of Measure

    Other Dimensions

    Weight

    		 N/A 14.59 Kg32.19 lb

    Width (T)

    		 N/A 2 in50.8 mm

    B - Width

    		 N/A 2 in50.8 mm
    Max Shaft Fillet Radius1 N/A 0.01 in0.30 mm
    Max Housing Fillet Radius2 N/A 0.090 in2.29 mm

    Shaft Backing Shoulder Diameter - Backface (db)

    		 N/A 1.91 in48.5 mm

    Housing Backing Shoulder Diameter - Frontface (Da)

    		 N/A 2.74 in69.10 mm

    Key Dimensions

    Cone Part Number

    		 N/A HM88649

    Cup Part Number

    		 N/A HM88610

    Related Assembly Number(s)

    		 N/A HM88649-90014

    Outer Spacer Part Number

    		 N/A HM88610EA

    Design Unit

    		 N/A Inch

    Bore (d)

    		 N/A 1.3750 in34.925 mm

    O.D. (D)

    		 N/A 2.8438 in72.233 mm
    Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 4480 lbf19900 N
    Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 7790 lbf34700 N
    K Factor 5 N/A 1.07
    e Factor 6 N/A 0.55

    Ratings

    C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 30100 lbf134000 N
    Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 4180 lbf18600 N

    Factors

    Y1 Factor 9 N/A 1.24
    Y2 Factor 10 N/A 1.84
    • 1 These maximum fillet radii will be cleared by the bearing corners.
    • 2 These maximum fillet radii will be cleared by the bearing corners.
    • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
    • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
    • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
    • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
    • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.