The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
2TS-DM assemblies are comprised of two single-row bearings with abutting back facing inner rings and an outer ring spacer with lubricating holes is typical. These are generally used at fixed positions on rotating shaft applications.

Design Attributes:
  • Two single row bearings, with or without a spacer
  • When spacers are used, bearing is furnished as a preset, matched assembly
  • Spacers available with or without lubricant grooves and holes
    •
    Unit of Measure

    Other Dimensions

    Weight

    		 N/A 88.58 Kg195.27 lb

    Width (T)

    		 N/A 6.8750 in174.625 mm

    B - Width

    		 N/A 6.25 in158.75 mm
    Max Shaft Fillet Radius1 N/A 0.060 in1.5 mm
    Max Housing Fillet Radius2 N/A 0.06 in1.52 mm

    Shaft Backing Shoulder Diameter - Backface (db)

    		 N/A 8.15 in207 mm

    Housing Backing Shoulder Diameter - Frontface (Da)

    		 N/A 13.46 in341.88 mm

    Key Dimensions

    Cone Part Number

    		 N/A EE117063

    Cup Part Number

    		 N/A 117148

    Related Assembly Number(s)

    		 N/A EE117063-90012 EE117063-90016 EE117063-90023 EE117063-90024

    Outer Spacer Part Number

    		 N/A Y3S-117148

    Design Unit

    		 N/A Inch

    Bore (d)

    		 N/A 6.3750 in161.925 mm

    O.D. (D)

    		 N/A 14.7500 in374.650 mm
    Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 77200 lbf343000 N
    Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 134000 lbf598000 N
    K Factor 5 N/A 0.83
    e Factor 6 N/A 0.71

    Ratings

    C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 518000 lbf2300000 N
    Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 93300 lbf415000 N

    Factors

    Y1 Factor 9 N/A 0.96
    Y2 Factor 10 N/A 1.42
    • 1 These maximum fillet radii will be cleared by the bearing corners.
    • 2 These maximum fillet radii will be cleared by the bearing corners.
    • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
    • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
    • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
    • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
    • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
    • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.