Batch CAD Cart (0)
  • Cart is empty
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

N/A 222.25 mm8.75 in

D - Outer Diameter

N/A 269.875 mm10.6250 in

Dimension C/B

N/A 76.2 mm3.0000 in

Specifications

Static Load Rating Co

N/A 1370000 N308000 lbf
Dynamic Load Rating C11 N/A 581000 N131000 lbf
Geometry Factor Cg2 N/A 0.1810

Thermal Speed Ratings - Oil

N/A 1400 rpm

Thermal Speed Ratings - Grease

N/A 1200 rpm

Mounting Data

Chamfer rsmin

N/A 4.060 mm0.16 in

Max. Mounting Dimensions Clearance Fit 1

N/A 222.25 mm8.75 in

Min. Mounting Dimensions Clearance Fit 1

N/A 222.220 mm8.7488 in

Max. Mounting Dimensions Clearance Fit 2

N/A 269.926 mm10.6270 in

Min. Mounting Dimensions Clearance Fit 2

N/A 269.875 mm10.625 in

Max. Mounting Dimensions Tight Transition Fit S

N/A 8.7480 mm222.199 in

Min. Mounting Dimensions Tight Transition Fit S

N/A 222.169 mm8.7468 in

Max. Mounting Dimensions Tight Transition Fit H

N/A 269.809 mm10.6220 in

Min. Mounting Dimensions Tight Transition Fit H

N/A 269.860 mm10.6240 in

Shoulder Diameter Da

N/A 254.00 mm10.000 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-12014048
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.