3D CAD and 2D Drawings
Find and download 3D CAD and 2D drawings for key Timken products.
Batch CAD Cart (0)
▾
- Clearance fit suggested for outer ring when housing is stationary relative to load.
- Tight transition fit suggested if housing rotates relative to load.
- Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
- Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
- Meets Military Standard MS 51961.
Unit of Measure
Bearing Dimensions
Shaft Diameter (Fw) |
N/A 114.30 mm4.50 in |
Dimension D |
N/A 152.400 mm6.000 in |
Dimension C/B |
N/A 57.15 mm2.25 in |
Specifications
Static Load Rating Co |
N/A 517 kN116000 lbf |
| Dynamic Load Rating C11 | N/A 285 kN64000 lbf |
| Geometry Factor Cg2 | N/A 0.1100 |
Speed Ratings - Oil |
N/A 3200 rpm |
Speed Ratings - Grease |
N/A 2800 rpm |
Weight |
N/A 6.691 lb3.035 Kg |
Mounting Data
Chamfer rsmin |
N/A 2.54 mm0.10 in |
Max. Mounting Dimensions Clearance Fit 1 |
N/A 114.30 mm4.50 in |
Min. Mounting Dimensions Clearance Fit 1 |
N/A 114.277 mm4.4991 in |
Max. Mounting Dimensions Clearance Fit 2 |
N/A 152.441 mm6.0016 in |
Min. Mounting Dimensions Clearance Fit 2 |
N/A 152.400 mm6.000 in |
Max. Mounting Dimensions Tight Transition Fit S |
N/A 114.264 mm4.4986 in |
Min. Mounting Dimensions Tight Transition Fit S |
N/A 114.242 mm4.4977 in |
Max. Mounting Dimensions Tight Transition Fit H |
N/A 152.344 mm5.9978 in |
Min. Mounting Dimensions Tight Transition Fit H |
N/A 152.385 mm5.9994 in |
Shoulder Diameter Da |
N/A 138.11 mm5.438 in |
- 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
- 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.
