Batch CAD Cart (0)
  • Cart is empty
Unit of Measure

Specifications

Design Units

Metric

d - Bore

152.400 mm

Type

NJ

Dimensions

D - Outer Diameter

266.7 mm10.5 in

C - Inner Ring Width

61.913 mm2.4375 in

B - Outer Ring Width

61.913 mm2.4375 in

Basic Load Ratings

C0 - Static Radial Rating

867000 N195000 lbf
C - Dynamic Radial Rating1 643000 N145000 lbf

Factors

Reference Thermal Speed Rating (Grease)

1400 rpm
Reference Thermal Speed Rating (Oil)2 1700 rpm
Cg - Geometry Factor3 0.1141

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius4 4.1 mm0.200 in
r - Outer Ring "To Clear" Radius5 4.1 mm0.200 in

da - Inner Ring Backing Diameter

174 mm6.9000 in

Da - Outer Ring Backing Diameter

245 mm9.7000 in
  • 1 Based on 1 x 106 L10 life for the ISO life calculation method.
  • 2 See thermal speed ratings in the engineering section.
  • 3 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 4 Maximum housing fillet radius that bearing corners will clear.
  • 5 Maximum shaft fillet radius that bearing corners will clear.