Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.

Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
Unit of Measure

Key Dimensions

Bore (d)

 N/A 12 in

O.D. (D)

 N/A 16.000 in406.4 mm

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 57700 lbf256662 N

Ball Type

 N/A STEEL

Other Dimensions

Bearing Width

 N/A 2 in50.8 mm

Max Shaft Fillet Radius

 N/A 0.2 in5.1 mm

Shaft Backing Shoulder Diameter

 N/A 12.750 in323.900 mm

Housing Backing Shoulder Diameter

 N/A 15.250 in387.400 mm

Ratings

Static Radial Load Rating (C0)

 N/A 71000 lbf315824 N

Limiting Speed - Grease

 N/A 840 rpm

Limiting Speed - Oil

 N/A 980 rpm

Abutment and Fillet Dimensions

r - Outer Ring "To Clear" Radius1 N/A 0.200 in5.1 mm
  • 1 These maximum fillet radii will be cleared by the bearing corners.