Batch CAD Cart (0)
  • Cart is empty
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.

Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
Unit of Measure

Specifications

Design Units

N/A Imperial

Ball Type

N/A STEEL

Manufacturing Part Number

N/A S10P Z5 FS50000;

Dimensions

d - Bore

N/A 1 in

D - Outer Diameter

N/A 2 in50.8 mm

Bearing Width

N/A 0.500 in12.7 mm

Basic Load Ratings

C0 - Static Radial Rating

N/A 1830 lbf8140 N

Ce - Dynamic Radial Rating

N/A 3490 lbf15500 N

Factors

Limiting Speed (Grease)

N/A 7832 rpm

Limiting Speed (Oil)

N/A 9138 rpm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius

N/A 0.03 in0.8 mm
r - Outer Ring "To Clear" Radius1 N/A 0.03 in0.800 mm

da - Inner Ring Backing Diameter

N/A 1.2008 in30.50 mm

Da - Outer Ring Backing Diameter

N/A 1.8386 in46.70 mm
  • 1 These maximum fillet radii will be cleared by the bearing corners.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.