Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.

Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
Unit of Measure

Key Dimensions

Bore (d)

 N/A 1/2 in

O.D. (D)

 N/A 1.125 in28.58 mm

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 1270 lbf5670 N

Ball Type

 N/A STEEL

Manufacturing Part Number

 N/A S5P Z1 FS50000;

Other Dimensions

Bearing Width

 N/A 0.25 in6.35 mm

Max Shaft Fillet Radius

 N/A 0.020 in0.4 mm

Shaft Backing Shoulder Diameter

 N/A 0.6102 in15.50 mm

Housing Backing Shoulder Diameter

 N/A 0.9882 in25.10 mm

Ratings

Static Radial Load Rating (C0)

 N/A 540 lbf2390 N

Limiting Speed - Grease

 N/A 14537 rpm

Limiting Speed - Oil

 N/A 16959 rpm

Abutment and Fillet Dimensions

r - Outer Ring "To Clear" Radius1 N/A 0.020 in0.4 mm
  • 1 These maximum fillet radii will be cleared by the bearing corners.