Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information

The Type 3 (Spacer Type) arrangement is specifically designed for the pump industry and is available in a variety of industry standard shaft separations. The shaft center spacer drops out to facilitate easier maintenance of pump parts without disturbing the alignment of pump and motor. Spacer type couplings utilize either standard delta hubs or optional round hubs. The center member of the Deltaflex is captured by the construction of the spacer flanges for greater safety. Standard spacer drop out lengths are available to accommodate shaft separations of 3.50, 4.38, 5, 7, 10, 12 and 15 inches. Special spacer lengths and stainless steel spacer couplings are available as an option.

The Type 4 (Floating Shaft) coupling components are identical to Type 3, except the floating shaft design uses a longer spacer tube to span distances up to 12 feet. Deltaflex floating shaft couplings are lightweight, dynamically balanced (as required) and corrosion resistant. The center member of the Deltaflex is captured by the construction of the spacer flanges for greater safety. Floating shaft couplings are also available in stainless steel.

Type 3 & 4 Deltaflex couplings are comprised of two hubs, two spacer flanges (with hardware), and a dropout spacer.
Unit of Measure

Specifications

Description 

 N/A 100HT-DLT SPCR FLNG

Type

 N/A Flex-Link

Material

 N/A Steel

Hub Style

 N/A Delta

Color

 N/A Metallic

Weight

 N/A 13.50 lb

Dimensional Data

Coupling

 N/A 100HT

Set Screw Thread Size (Dimension T)

 N/A 1/2-13

Keyway Size (W x D)

 N/A No Keyway

Outside Diameter

 N/A 12.750 in

Min. Bore (Dimensions ID1/ID2)

 N/A 1.750 in44.00 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 4.250 in108.00 mm

Dimension BC

 N/A 6.320 in160.53 mm

Dimension L

 N/A 1.250 in31.75 mm

Dimension P

 N/A 4.373 to 4.375 in111.074 to 111.125 mm

Dimension Q

 N/A 0.120 in3.05 mm

Dimension R

 N/A 1.250 in31.75 mm

Dimension TH (Axial Cap / Screw Tap)

 N/A 5/8-11 x 1.50 in

Cubic inches

 N/A 203.20313 in³

Performance Data

Max. Continuous Torque

 N/A 33000.00 in·lb

Peak Overload Torque

 N/A 49500.00 in·lb

Max. Parallel Misalignment at Max. Span at 1,750 rpm

 N/A 4.000 in

Max. Span (Both Ends) at 875 rpm

 N/A 150.000 in

Max. Span (Both Ends) at 1,150 rpm

 N/A 120.000 in

Max. Span (Both Ends) at 1,750 rpm

 N/A 104.000 in

Rated HP at 100 rpm

 N/A 52.40 hp

Rated HP at 875 rpm (Standard Motor)

 N/A 458.00 hp

Rated HP at 1,150 rpm (Standard Motor)

 N/A 603.00 hp

Rated HP at 1,750 rpm (Standard Motor)

 N/A 916.00 hp

Rated HP at 3,500 rpm (Standard Motor)

 N/A 1832.00 hp

Coupling Design

Coupling Design

 N/A
    The Deltaflex coupling is the real solution to installation, misalignment, and performance problems. Conventional couplings – even when carefully aligned to the manufacturer’s specifications – cannot match the low level of vibration, moment of inertia, and additional cushion for future misalignment of a visually aligned Deltaflex coupling.
    In addition, the Deltaflex coupling gives longer life to equipment shaft bearings. That means longer operating time and reduced maintenance cost. The Deltaflex can handle greater shaft misalignment without generating heavy reaction loads on the equipment shaft bearings.
    A properly applied and installed Deltaflex coupling offers more equipment protection compared to conventional couplings.

Features

Features 

 N/A
  • Maximum misalignment capabilities, with negligible reactionary load, for longer equipment bearing life
  • Operates as smoothly when misaligned as when perfectly aligned
  • No lubrication and no maintenance required
  • Equipment can be visually aligned. No special tools are required, which saves on installation time and cost
  • Eliminates premature equipment bearing and seal failure resulting from misalignment forces. This means greater equipment productivity
  • Torsionally stiff coupling with no backlash means it is capable of high speed applications, within catalog ratings
  • Provides long-term performance and economy
  • Available in 5 basic sizes, from 10HP to 900HP
  • Standard all-metal and stainless steel versions are both available from stock
  • Many configurations are available, including shaft-to-shaft, spacer, floating shaft, and special assemblies

Notes

Notes 

 N/A
  • Size 50: In some bore sizes the tap is 5/8-18.
  • Maximum bores are provided with standard keyway.
  • RSB hubs do not have a keyway.
  • Both Delta hubs and Round hubs are provided with two set screws at 120°.
  • Minimum bore hubs are furnished with 2 set screws at 120°, No Keyway.
  • S is the Spacer drop out or floating shaft length, S = BE-2(R).
  • LTB is the length through the hub bore. OAL is the overall length, OAL = BE + 2(LTB).
  • BE is the distance between the ends of equipment shafts—please supply this dimension when placing orders, BE = OAL-2 (LTB), BE = S + 2 (R), BE < 18 inch = Spacer coupling (Type 3); BE > 18 inch = Floating Shaft coupling (Type 4). ED
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.