Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Unit of Measure

Key Dimensions

Cone Part Number

 N/A 3585

Cup Part Number

 N/A 3525-B

Bore (d)

 N/A 1 5/8 in41.275 mm

O.D. (D)

 N/A 3.4375 in87.313 mm

Width (T)

 N/A 0.4370 in11.100 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 25500 lbf113000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 6610 lbf29400 N
e Factor3 N/A 0.31
Y Factor 4 N/A 1.96
K Factor 5 N/A 1.91

Other Dimensions

Weight

 N/A 3.1 lb1.4 Kg

Inner Ring Width (B)

 N/A 1.2160 in30.886 mm

Outer Ring Width (C)

 N/A 0.9375 in23.813 mm

Outer Ring Flange O.D.(D1)

 N/A 3.6215 in91.986 mm

Outer Ring Flange Width (C2)

 N/A 0.1870 in4.750 mm
Effective Center Location6 N/A -0.4 in-10.2 mm
Max Shaft Fillet Radius7 N/A 0.060 in1.5 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 1.89 in48 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 1.97 in50 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 3.27 in82.04 mm
Max Housing Fillet Radius8 N/A 0.130 in3.30 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 3460 lbf15400 N

Static Radial Load Rating (C0)

 N/A 30100 lbf134000 N

Factors

G1 Factor

 N/A 39.5

G2 Factor

 N/A 10.5
Geometry Factor (Cg) 10 N/A 0.0808
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.