Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Unit of Measure

Key Dimensions

UPC

 N/A 0013992332967

SAP Material ID

 N/A 100374741

Cone Part Number

 N/A 65212

Cup Part Number

 N/A 65500-B

Bore (d)

 N/A 2.1250 in53.975 mm

O.D. (D)

 N/A 5.000 in127 mm

Width (T)

 N/A 0.6563 in16.67 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 54700 lbf243000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 63100 N
e Factor3 N/A 0.49
Y Factor 4 N/A 1.23
K Factor 5 N/A 1.2

Other Dimensions

Weight

 N/A 6.30 lb2.87 Kg

Inner Ring Width (B)

 N/A 1.75 in44.45 mm

Outer Ring Width (C)

 N/A 1.375 in34.925 mm

Outer Ring Flange O.D.(D1)

 N/A 5.2772 in134.041 mm

Outer Ring Flange Width (C2)

 N/A 0.2813 in7.145 mm
Effective Center Location6 N/A -0.37 in-9.4 mm
Max Shaft Fillet Radius7 N/A 0.140 in3.600 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 2.8 in71 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 3.03 in77 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 4.75 in120.65 mm
Max Housing Fillet Radius8 N/A 0.130 in3.30 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 11800 lbf52700 N

Static Radial Load Rating (C0)

 N/A 66700 lbf297000 N

Factors

Geometry Factor (Cg) 10 N/A 0.0827
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.