Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Specifications

Series

 N/A 640000

Cone Part Number

 N/A EE640192

Cup Part Number

 N/A 640260-B

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE640192-90055

Dimensions

d - Bore

 N/A 19.2500 in488.950 mm

D - Cup Outer Diameter

 N/A 26.0000 in660.400 mm

D1 - Flange Outer Diameter

 N/A 26.6250 in676.275 mm

B - Cone Width

 N/A 3.7188 in94.458 mm

C - Cup Width

 N/A 2.75 in69.85 mm

C1 - Cup Flange Width

 N/A 0.5625 in14.288 mm

T1 - Bearing Width to Flange

 N/A 1.5000 in38.100 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.250 in6.4 mm

da - Cone Frontface Backing Diameter

 N/A 20.2 in513 mm

db - Cone Backface Backing Diameter

 N/A 20.55 in522 mm

Da - Cup Frontface Backing Diameter

 N/A 25.39 in644.91 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.26 in6.6 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.32 in8.1 mm
a - Effective Center Location3 N/A 0.19 in4.8 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 138000 lbf614000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 533000 lbf2370000 N

C0 - Static Radial Rating

 N/A 1030000 lbf4590000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 72600 lbf323000 N

Factors

K - Factor7 N/A 1.9
e - ISO Factor8 N/A 0.31
Y - ISO Factor9 N/A 1.95

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 6320

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 601
Cg - Geometry Factor10 N/A 0.231
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.