Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Specifications

Series

 N/A 820000

Cone Part Number

 N/A EE820085

Cup Part Number

 N/A 820160-B

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE820085-90028 EE820085-903B1

Dimensions

d - Bore

 N/A 8.5000 in215.900 mm

D - Cup Outer Diameter

 N/A 16.0000 in406.400 mm

D1 - Flange Outer Diameter

 N/A 16.7500 in425.450 mm

B - Cone Width

 N/A 3.6875 in93.663 mm

C - Cup Width

 N/A 2.75 in69.85 mm

C1 - Cup Flange Width

 N/A 0.6875 in17.463 mm

T1 - Bearing Width to Flange

 N/A 1.6250 in41.275 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.25 in6.4 mm
r - Cup Backface "To Clear" Radius2 N/A 0.250 in6.4 mm

da - Cone Frontface Backing Diameter

 N/A 9.49 in241 mm

db - Cone Backface Backing Diameter

 N/A 9.88 in251 mm

Da - Cup Frontface Backing Diameter

 N/A 15.27 in387.86 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.17 in4.32 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.38 in9.65 mm
a - Effective Center Location3 N/A -0.49 in-12.4 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 382000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 331000 lbf1470000 N

C0 - Static Radial Rating

 N/A 506000 lbf2250000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 57800 lbf257000 N

Factors

K - Factor7 N/A 1.48
e - ISO Factor8 N/A 0.39
Y - ISO Factor9 N/A 1.52
Cg - Geometry Factor10 N/A 0.151
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.