PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature range: -65°F to +325°F.
Keyslots are available. Units are supplied without keyslots. When a keyslot is required, specify by adding suffix "K". Ex.: HXAW-8ET-10K.
As applicable, keyslots will conform to NAS 559.
Unit of Measure
Specifications
Part Number
N/AHXAW-4ET-10K
Thread Type
N/ARight Hand
Thread Configuration
N/AFemale
B - Ball Bore
N/A.2500 in
W - Ball Width
N/A.593 in
H - Head Width
N/A.265 in
A - Base to Center
N/A1.625 in
D - Head Diameter
N/A1.000 in
O - Ball Shoulder Diameter
N/A.390 in
Ball Diameter
N/A.593 in
C - Thread Depth [inch]
N/A.937 in
Thread Size
N/A5/16-24
Thread Class
N/AUNJF-3B
E - Diameter
N/A.562 in
K - Boss Diameter
N/A.625 in
F - Boss Height
N/A.250 in
G - Base to Inspection Hole Center
N/A.375 in
J - Wrench Flat Width
N/A.577 in
a - Misalignment Angle
N/A23 º
No Load Rotational Breakaway Torque
N/A1 to 15 in·lb
Ultimate Radial Static Load Capacity
N/A8,509 lbs
Approximate Brg. Weight
N/A.11 lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the S222 suplement catalog under the "View Product Catalogs" tab from the home page.
