All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Universal Joints > HD Type Universal Joints > HD Type with Keyway - Inch (Imperial) Bores > Part Number 68514448630  

Part Number 68514448630, HD Type with Keyway - Inch (Imperial) Bores

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

HD Type Universal Joints incorporate induction hardened yoke ears for longer life using the standard pin and block design. It is ideal for applications with angles up to 25° and speeds of up to 1,750 RPM. Boot retaining grooves are standard. HD Type are available in round, hex, splined, or keyway bore.

For optimal wear and extended life, lubrication and boots are required. (Boots are available for purchase separately.) HDD and HDDX drive line assemblies can also be provided to increase life of your drive line or drive shaft.




Notes  · Specifications  · Dimensional Data  · Performance Data  · Features

Notes

Disclaimer
Lovejoy: CAD Models are accurate envelope dimensions only. Features such as bore size and keyway are not rendered or are only representative. Contact Lovejoy Technical Support or refer to product catalogs for details.

Notes 
  • Static Breaking Torque is not a recommended operating torque.
  • Square and hex bores are measured across the flats.
  • Operation of all universal joints is determined by the angle/speed combinations of the application. Consult Lovejoy Engineering for specific limitations and recommendations.
  • Applications that fall outside the limitations of these tables should be referred to Lovejoy Engineering for assistance.


Specifications

Description 
HD14B-UJ-1-3/4X1-3/4-KW NSS BE

Type
Universal Joints - HD Type

Material
Steel

Weight
11.35 lb

Style
Bored

Color
Metallic

Bore Type
Finished Bore


Dimensional Data

Bore A & B
1-3/4 in

Size
HD14B

Set Screw Size
No Setscrew

Keyway A & B (W x D)
7/16 x 7/32 in

Outside Diameter
3.000 in

Overall Length
9.060 in

Bore Depth (Dimension C)
2.750 in

Max. Bore (Dimensions ID1/ID2)
1.810 in
48.00 mm

Main Pin Height (Dimension E)
4.53 in

Cubic inches
81.54000 in³


Performance Data

Operating Temperature Range
-30 to 212 ºF

Static Breaking Torque
65400.00 in·lb

Max. Speed
1750.00 rpm

Static Breaking Torque
65400.00 in-lb

Max. Angle Offset
25.00 º


Features

Features 
  • Industry standard
  • Stainless steel and needle bearing available
  • 13 sizes
  • Pin & Block design
  • Boot retaining grooves standard


 MORE IMAGES 

·  Running Curves


 DOWNLOADS 

Universal Joints Catalog (full catalog)
(PDF, 0KB)

UJoints D1-D14 Assembly Instructions
(PDF, 0KB)