Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

150 mm

Cage Type

EM

UPC Code

087796200968

Cage Material

Brass

Superseded Part

22230YMW33

Dimensions

D - Outer Diameter

10.6299 in270 mm

B' - Inner Ring Width

2.874 in73 mm

B - Outer Ring Width

2.8740 in73 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 0.100 in2.5 mm
r - Outer Ring "To Clear" Radius2 0.1 in2.5 mm

da - Inner Ring Backing Diameter

179 mm7.0000 in

Da - Outer Ring Backing Diameter

246 mm9.7000 in

Basic Load Ratings

C0 - Static Radial Rating

276000 lbf1230000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

225000 lbf1000000 N

Factors

e - ISO Factor3 0.25
Y0 - ISO Factor4 2.63
Y1 - ISO Factor5 2.69
Y2 - ISO Factor6 4

Reference Thermal Speed Rating (Grease)

2000 rpm
Reference Thermal Speed Rating (Oil)7 2400 rpm
Cg - Geometry Factor8 0.0899
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.