Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 65 mm

Cage Type

 N/A EM

UPC Code

 N/A 087796026315

Cage Material

 N/A Brass

Superseded Part

 N/A 22313YMW800C4

Dimensions

D - Outer Diameter

 N/A 5.5115 in139.993 mm

B' - Inner Ring Width

 N/A 1.8898 in48 mm

B - Outer Ring Width

 N/A 1.8898 in48 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.080 in2 mm
r - Outer Ring "To Clear" Radius2 N/A 0.080 in2 mm

da - Inner Ring Backing Diameter

 N/A 84.000 mm3.300 in

Da - Outer Ring Backing Diameter

 N/A 127.000 mm5.000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 77800 lbf346000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 77400 lbf344000 N

Factors

e - ISO Factor3 N/A 0.33
Y0 - ISO Factor4 N/A 2
Y1 - ISO Factor5 N/A 2.05
Y2 - ISO Factor6 N/A 3.05

Reference Thermal Speed Rating (Grease)

 N/A 3900 rpm
Reference Thermal Speed Rating (Oil)7 N/A 4600 rpm
Cg - Geometry Factor8 N/A 0.0558
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.