Key Features
- Longer bearing life achieved from higher capacity (vs. competitors)
- Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
- Better contaminant purging from slots on cage face helps extend bearing life
- Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a brass cage
Unit of Measure
Key Dimensions
Bore (d) |
N/A
80 |
O.D. (D) |
N/A
6.6926 169.993 |
Width (B) |
N/A
2.2835 58 |
Dynamic Radial Load Rating - 1M Revs (C1) |
N/A
112000 498000 |
| e Factor 1 |
N/A
0.33 |
UPC Code |
N/A
087796026612 |
Other Dimensions
| Max Shaft Fillet Radius2 |
N/A
0.08 2 |
Shaft Backing Shoulder Diameter |
N/A
103 4.1000 |
Housing Backing Shoulder Diameter |
N/A
153.000 6.000 |
Design Unit |
N/A
Metric |
Cage Type |
N/A
EM |
Cage Material |
N/A
Brass |
Superseded Part |
N/A
22316YMW33W800C4 |
- 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 2 Maximum housing fillet radius that bearing corners will clear.
- 3 See thermal speed ratings in the engineering section.
- 4 These factors apply for both inch and metric calculations. See engineering
- 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 7 Geometry constant for Lubrication Life Adjustment Factor a3l.