Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 130 mm

Cage Type

 N/A EM

UPC Code

 N/A 087796031937

Cage Material

 N/A Brass

Superseded Part

 N/A 23326YMW33W800C4

Dimensions

D - Outer Diameter

 N/A 11.0233 in279.993 mm

B' - Inner Ring Width

 N/A 4.4094 in112 mm

B - Outer Ring Width

 N/A 4.4094 in112 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.120 in3 mm
r - Outer Ring "To Clear" Radius2 N/A 0.12 in3 mm

da - Inner Ring Backing Diameter

 N/A 164.000 mm6.5000 in

Da - Outer Ring Backing Diameter

 N/A 245 mm9.6000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 359000 lbf1590000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 302000 lbf1340000 N

Factors

e - ISO Factor3 N/A 0.42
Y0 - ISO Factor4 N/A 1.59
Y1 - ISO Factor5 N/A 1.62
Y2 - ISO Factor6 N/A 2.42

Reference Thermal Speed Rating (Grease)

 N/A 1200 rpm
Reference Thermal Speed Rating (Oil)7 N/A 1400 rpm
Cg - Geometry Factor8 N/A 0.086
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.