Batch CAD Cart (0)
  • Cart is empty
  • High torque
  • Exceptional concentricity
  • Self-centering
  • Axial hub position can move during clamping
  • Metric shafts 18 mm to 200 mm
  • Inch shafts 3/4 to 4 inch
  • Larger sizes on request
  • 259 - 40,274 ft-lb
Unit of Measure

Specifications

Description 

SLD-1350-MM-48X80

Coupling Size

SLD1350

Type

Internal

Collar Material

Silver/Metallic

Weight

1.52 lb

Screw Type

Socket Head Cap Screw

Screw Material

Steel

Style

Self Centering

Application

Internal Shaft Locking Device

# of Locking Screws

8

Dimensional Data

Shaft Size 

48 x 80 mm

Hub Outside Diameter (Dimension d)

1.890 in48.00 mm

Tolerance of Shaft (T1)

+0 -0.0015 in

Shaft Locking Device Outside Diameter (Dimension D)

3.150 in80.00 mm

Tolerance of Hub Bore (T2)

-0 +0.0018 in

Thrust Rings Width at Relaxed State (Dimension B)

1.319 in33.50 mm

Locking Screw Size (Dimension T)

M8

Contact Length (Dimension l)

0.787 in20.00 mm

Total Width at Relaxed State (Dimension L)

1.614 in41.00 mm

Cubic inches

16.01492 in³406.77884 mm³

Performance Data

Max. Transmissible Axial Force

21241.00 lbf

Max. Transmissible Torque

1673.00 ft·lb

Screw Tightening Torque

26.00 ft·lb

Pressure on The Hub

23931.00 psi

Pressure on The Shaft

29588.00 psi

Features

Features 

Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer