Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: AWC-3TP/AWC-3TE)
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature Range: -65°F to + 325°F.
"K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: AWC-3TD1/AWC-3TD2)
Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14103 (grooved) and AS14102 (plain), and are approved for procurement under these specifications.
Unit of Measure
Specifications
Part Number
N/AAWC-14TKD2
SAE Part Number
N/AMS14102-14KU
Bearing Type
N/APlain
B - Ball Bore
N/A.8750 in
D - Outside Diameter
N/A1.6450 in
W - Ball Width
N/A.875 in
H - Race Width
N/A.755 in
O - Ball Shoulder Diameter
N/A.995 in
Ball Diameter
N/A1.375 in
a - Misalignment Angle
N/A6 º
Radial Static Limit Load Capacity
N/A65,200 lbs
Axial Static Limit Load Capacity
N/A10,800 lb
Oscillating Load
N/A33,600 lb
Standard Fit, No Load Rotational Breakaway Torque
N/A0.0 to 2.0 in·lb
Approximate Brg. Weight
N/A.350 lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the View Product Catalogs" tab from the home page."
