Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: AWC-3TP/AWC-3TE)
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature Range: -65°F to + 325°F.
"K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: AWC-3TD1/AWC-3TD2)
Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14103 (grooved) and AS14102 (plain), and are approved for procurement under these specifications.
Unit of Measure
Specifications
Part Number
N/AAWC-3TCKD2
SAE Part Number
N/AMS14102-3CKU
Bearing Type
N/APlain
B - Ball Bore
N/A.1900 in
D - Outside Diameter
N/A.6450 in
W - Ball Width
N/A.437 in
H - Race Width
N/A.327 in
O - Ball Shoulder Diameter
N/A.300 in
Ball Diameter
N/A.531 in
a - Misalignment Angle
N/A15 º
Radial Static Limit Load Capacity
N/A2,500 lbs
Axial Static Limit Load Capacity
N/A1,770 lb
Oscillating Load
N/A4,900 lb
Standard Fit, No Load Rotational Breakaway Torque
N/A0.0 to 1.0 in·lb
Approximate Brg. Weight
N/A.031 lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the View Product Catalogs tab from the home page.""
