Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: ANC-3TP/ANC-3TE)
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature Range: -65°F to + 325°F.
"K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: ANC-3TD1/ANC-3TD2)
Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14101 (grooved) and AS14104 (plain), and are approved for procurement under these specifications.
Unit of Measure
Specifications
Part Number
N/AANC-16TCPKD1
SAE Part Number
N/AMS14101-16CPKT
Bearing Type
N/APlain
B - Ball Bore
N/A1.0000 in
D - Outside Diameter
N/A1.7600 in
W - Ball Width
N/A1.000 in
H - Race Width
N/A.797 in
O - Ball Shoulder Diameter
N/A1.118 in
P - Groove Depth
N/A.055 in
G - Groove Pitch Diameter
N/A1.626 in
R - Grooved Radius
N/A.015 in
Ball Diameter
N/A1.500 in
a - Misalignment Angle
N/A9 º
Radial Static Limit Load Capacity
N/A82,200 lbs
Axial Static Limit Load Capacity
N/A12,160 lb
Oscillating Load
N/A38,000 lb
No Load Rotational Breakaway Torque
N/A0.0 to 2.0 in·lb
Approximate Brg. Weight
N/A.39 lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.
© 2016 The Timken Company.