Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.
Unit of Measure

Specifications

Rows per Set

 N/A Triplex

Seal Type

 N/A Standard

Design Units

 N/A Metric

d - Bore

 N/A 35 mm

Ball Type

 N/A Ceramic

Cage Type

 N/A CR - Phenolic Outer Land Riding Cage

Precision Rating

 N/A ISO P4S (ABEC 7/9)

Dimensions

D - Outer Diameter

 N/A 55 mm2.1654 in

Bearing Width

 N/A 10 mm0.3937 in

Total Width

 N/A 30 mm1.1811 in

Contact Angle

 N/A 15 º

Basic Load Ratings

C0 - Static Radial Rating (per row)

 N/A 2850 N640 lbf
Ce - Dynamic Radial Rating (per row)1 N/A 5120 N1150 lbf

C1 ISO - Dynamic Radial Rating (per row)

 N/A 4660 N1040 lbf

Factors

Limiting Speed (Grease) (per row)

 N/A 36600 rpm

Limiting Speed (Oil)

 N/A 73200 rpm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius2 N/A 0.6 mm0.024 in
r - Outer Ring "To Clear" Radius3 N/A 0.6 mm0.024 in

da - Inner Ring Backing Diameter

 N/A 39.5 mm1.550 in

Da - Outer Ring Backing Diameter

 N/A 51.1 mm2.010 in
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.