Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.
Unit of Measure

Specifications

Rows per Set

 N/A Quadruplex

Seal Type

 N/A Standard

Design Units

 N/A Metric

d - Bore

 N/A 20 mm

Ball Type

 N/A STEEL

Cage Type

 N/A CR - Phenolic Outer Land Riding Cage

Precision Rating

 N/A ISO P4S (ABEC 7/9)

Dimensions

D - Outer Diameter

 N/A 42 mm1.6535 in

Bearing Width

 N/A 12 mm0.4724 in

Total Width

 N/A 48 mm1.8896 in

Contact Angle

 N/A 25 º

Basic Load Ratings

C0 - Static Radial Rating (per row)

 N/A 3570 N800 lbf
Ce - Dynamic Radial Rating (per row)1 N/A 8370 N1880 lbf

C1 ISO - Dynamic Radial Rating (per row)

 N/A 7610 N1710 lbf

Factors

Limiting Speed (Grease) (per row)

 N/A 44000 rpm

Limiting Speed (Oil)

 N/A 88000 rpm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius2 N/A 0.6 mm0.024 in
r - Outer Ring "To Clear" Radius3 N/A 0.6 mm0.024 in

da - Inner Ring Backing Diameter

 N/A 24.8 mm0.980 in

Da - Outer Ring Backing Diameter

 N/A 37.7 mm1.490 in
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.