Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.
Unit of Measure

Specifications

Rows per Set

 N/A Single

Design Units

 N/A Metric

d - Bore

 N/A 127 mm

Ball Type

 N/A STEEL

Cage Type

 N/A CR - Phenolic Outer Land Riding Cage

Manufacturing Part Number

 N/A MM9326WI 6HSUH

Dimensions

D - Outer Diameter

 N/A 180 mm7.0866 in

Bearing Width

 N/A 22.23 mm0.8750 in

Total Width

 N/A 22.23 mm0.875 in

Contact Angle

 N/A 60 º

Basic Load Ratings

C0 - Static Radial Rating (per row)

 N/A 186800 N42000 lbf
Ce - Dynamic Radial Rating (per row)1 N/A 94300 N21200 lbf

C1 ISO - Dynamic Radial Rating (per row)

 N/A 85000 N19120 lbf

Factors

Limiting Speed (Grease) (per row)

 N/A 750 rpm

Limiting Speed (Oil) (per row)

 N/A 1500 rpm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius2 N/A 1 mm0.039 in
r - Outer Ring "To Clear" Radius3 N/A 1 mm0.039 in

da - Inner Ring Backing Diameter

 N/A 155.054 mm6.1045 in

Da - Outer Ring Backing Diameter

 N/A 156.591 mm6.165 in
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.