CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.
Request Information
Unit of Measure

Key Dimensions

Rows per Set

 N/A Duplex

Design Units

 N/A Metric

Bore (d)

 N/A 10 mm

O.D. (D)

 N/A 0.8661 in22 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 790 lbf3510 N

Ball Type

 N/A STEEL

Cage Type

 N/A CR - Phenolic Outer Land Riding Cage

Cage Material

 N/A MBR Cage

Manufacturing Part Number

 N/A 2MV9300WI DULFS637

Grease

 N/A Isoflex NBU 15

Preload

 N/A Light

Other Dimensions

Bearing Width

 N/A 0.2362 in6 mm

Total Width

 N/A 3.3072 in84 mm

Contact Angle

 N/A 15 º
Max Shaft Fillet Radius2 N/A 0.012 in0.30 mm

Shaft Backing Shoulder Diameter

 N/A 0.510 in13.0 mm

Housing Backing Shoulder Diameter

 N/A 0.770 in19.6 mm

Ratings

Static Radial Load Rating (C0)

 N/A 370 lbf1640 N

Limiting Speed - Grease

 N/A 77500 rpm

Limiting Speed - Oil

 N/A 155000 rpm

C1 ISO - Dynamic Radial Rating (per row)

 N/A 718 lbf3190 N

Abutment and Fillet Dimensions

r - Outer Ring "To Clear" Radius3 N/A 0.012 in0.3 mm
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.