Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance.
Unit of Measure

Specifications

Rows per Set

 N/A Triplex

Design Units

 N/A Metric

d - Bore

 N/A 10 mm

Ball Type

 N/A STEEL

Cage Type

 N/A CR - Phenolic Outer Land Riding Cage

Manufacturing Part Number

 N/A 3MV9300WI TUH

Dimensions

D - Outer Diameter

 N/A 22 mm0.8661 in

Bearing Width

 N/A 6 mm0.2362 in

Total Width

 N/A 18 mm0.7086 in

Contact Angle

 N/A 25 º

Basic Load Ratings

C0 - Static Radial Rating (per row)

 N/A 1580 N360 lbf
Ce - Dynamic Radial Rating (per row)1 N/A 3380 N760 lbf

C1 ISO - Dynamic Radial Rating (per row)

 N/A 3070 N691 lbf

Factors

Limiting Speed (Grease) (per row)

 N/A 69800 rpm

Limiting Speed (Oil)

 N/A 139600 rpm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius2 N/A 0.3 mm0.012 in
r - Outer Ring "To Clear" Radius3 N/A 0.3 mm0.012 in

da - Inner Ring Backing Diameter

 N/A 13.0 mm0.510 in

Da - Outer Ring Backing Diameter

 N/A 19.6 mm0.770 in
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.