Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.

Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
Unit of Measure

Specifications

Design Units

 N/A Metric

Rows per Set

 N/A Single

d - Bore

 N/A 65 mm

Ball Type

 N/A STEEL

Cage Type

 N/A CR - Phenolic Inner Land Riding Cage

Precision Class

 N/A ISO P4S (ABEC 7/9)

Dimensions

D - Outer Diameter

 N/A 120 mm4.7244 in

Bearing Width

 N/A 23 mm0.9055 in

Basic Load Ratings

Ce - Dynamic Radial Rating (per row)1 N/A 63400 N14300 lbf

C0 - Static Radial Rating (per row)

 N/A 40000 N9000 lbf

C1 ISO - Dynamic Radial Rating (per row)

 N/A 57600 N13000 lbf

Factors

Limiting Speed (Grease) (per row)

 N/A 11100 rpm

Limiting Speed (Oil)

 N/A 22200 rpm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius2 N/A 1.5 mm0.059 in
r - Outer Ring "To Clear" Radius3 N/A 1.5 mm0.059 in

da - Inner Ring Backing Diameter

 N/A 75.7 mm2.980 in

Da - Outer Ring Backing Diameter

 N/A 109.7 mm4.320 in
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.