Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information

RunRight® RT F tensioners are designed for front mounting applications where access to back side or rear mounting surfaces is not possible. A single threaded hole is required to mount these tensioners. These tensioners include a special mounting screw and spacer bushing. They are manufactured with powder metal or cast iron housings, cast iron arms and inner square, come with the standard Tensys™ 10 rubber inserts, and can be used for applications operating within a -40° to 180°F (-40° to 80°C) temperature range.
Unit of Measure

Specifications

Description 

 N/A RT-F-50-TENSNR MM

Type

 N/A Chain/Belt Tensioner

Element Material

 N/A Natural Rubber

Style

 N/A Elastomeric

Color

 N/A Black

Dimensional Data

Tensioner

 N/A RT F50-M

Mounting Bolt Size

 N/A M20

Outside Diameter (Dim D)

 N/A 130 mm5.120 in

Overall Length (Dim E)

 N/A 210 mm8.270 in

Dimension T

 N/A 20.5 mm

Dimension L

 N/A 290 mm11.42 in

Dimension J-1

 N/A 250 mm9.84 in

Dimension J-2

 N/A 200 mm7.87 in

Dimension M

 N/A 23 mm

Dimension R

 N/A 27 mm

Dimension G

 N/A 20 mm0.79 in

Dimension O

 N/A 20 mm0.79 in

Dimension P

 N/A 17 mm0.67 in

Dimension K

 N/A 80 mm3.15 in

Performance Data

Normal Temperature Range

 N/A -40 to 180 ºC-40 to 80 ºF

Mounting Bolt Torque

 N/A 750 N·m6638 in·lb

Force at 20° Angle of Pretension (Normal Force Level) (Dimension F)

 N/A 2150 N483.3 lb

Distance at 20° Angle of Pretension (Normal Force Level) (Dimension S)

 N/A 86 mm3.4 in

Notes

Notes 

 N/A
  • The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.
  • Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.
  • Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets).
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.