Part Number 68514441504, J Type Flanges with Keyway - Metric Bores On The Timken Company

Search Catalog



	All Product Types J Type Flanges with Keyway - Metric Bores


	Part Number 68514441504, J Type Flanges with Keyway - Metric Bores

The J Type flanges in sizes 3J and 4J are made from die cast of high strength zinc alloy (tensile strength of 41,000 psi) and are furnished bore-to-size.
Size 5J is provided in either zinc alloy or cast iron depending on the bore size.
Size 6J is made from cast iron.
J flanges are compatible with EPDM or Neoprene sleeves.
Each flange has a keyway and two set screws (one set screw over the key and one at 90° to the keyway).
The J Type coupling consists of two flanges and one sleeve.

Unit of Measure: Imperial Metric Both

Notes · Specifications · Dimensional Data · Performance Data

Notes

Disclaimer		Lovejoy: CAD Models are accurate envelope dimensions only. Features such as bore size and keyway are not rendered or are only representative. Contact Lovejoy Technical Support or refer to product catalogs for details.

Notes		Spacing between shafts should be greater than 1/8 inch and less than OAL minus the sum of the two bore dimensions.

Specifications

Dimensional Data

Performance Data

Nominal Torque (with EPDM Sleeve)		120 in·lb 13.56 N·m

Max. Speed		7600.00 rpm

Torsional Stiffness		458.00 in·lb/rad

Rated HP at 100 rpm		0.20 hp

Rated HP at 1,200 rpm		2.30 hp

Rated HP at 1,800 rpm		3.40 hp

Rated HP at 3,600 rpm		6.90 hp

MORE IMAGES


	· S-Flex Coupling Misalignment

	· Dimensional Drawing - S-Flex J Type Coupling

DOWNLOADS


		S-Flex Endurance Catalog

		S-Flex Endurance Installation Instructions (PDF, 0KB)

		S-Flex Endurance Installation Video

Part Number 68514441504, J Type Flanges with Keyway - Metric Bores