All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > S-Flex Endurance® Couplings > TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings > Part Number 68514462271  

Part Number 68514462271, TF (Front Mount) Type Flanges for use with Taper-Lock® Bushings

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal
  • TF Type flanges allow for mounting the bushing on the front (hub) side of the flange
  • TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types.




Specifications  · Dimensional Data  · Performance Data  · Notes

Specifications

Description 
8TF-FLNG-TAPER-BSW-THREAD

Coupling Size
8TF

Type
Coupling Flange

Material
Cast Iron

Weight
17.00 lb

Color
Gray

Bore Type
Bored to Accept 1215/1210 Taper Lock Bushing

Mount Type
Front

Bushing Required
1615/1610

Coupling Type
S-Flex

UNC Flange UPC Number
62271


Dimensional Data

Keyway Size (W x D)
No Keyway

Hub Diameter
3.250 in
82.55 mm

Dimension L
1.940 in
49.28 mm

Outside Diameter
5.450 in
138.43 mm

Overall Length
5.00 in
127.00 mm

Max. Bore (Dimensions ID1/ID2)
1.620 in
42.00 mm

Dimension FL
0.910 in
23.11 mm

Dimension G
1.130 in
28.70 mm

Dimension P
1.030 in
26.16 mm

Dimension R
1.500 in
38.10 mm

Bushing Screw Size
3/8-16

Cubic inches
57.62285 in³


Performance Data

Nominal Torque (with EPDM Sleeve)
1135 in·lb

Max. Speed
4500 rpm

Torsional Stiffness
4335.00 in·lb/rad

Rated HP at 100 rpm for 1.0 Service Factor
1.80 hp

Rated HP at 1,200 rpm
22.00 hp

Rated HP at 1,800 rpm
32.00 hp

Rated HP at 3,600 rpm
65.00 hp


Notes

Notes 
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.


 MORE IMAGES 

·  S-Flex Coupling Misalignment


 DOWNLOADS 

S-Flex Endurance Catalog

S-Flex Endurance Installation Instructions
(PDF, 0KB)

S-Flex Endurance Installation Video