3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Batch CAD Cart (0)
  • Cart is empty
  • Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
  • To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22220).

Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
Unit of Measure


Bearing Number

N/A 22226

Diameter S-2

N/A 5 7/8 in

Diameter S-3

N/A 4 15/16 in


N/A 6.00 in


N/A 18.3750 in


N/A 7.500 in


N/A 2.3750 in

E Max.

N/A 16.0000 in

E Min.

N/A 14.6250 in


N/A 4.50 in
H1 N/A 11.8750 in

Oil Level K

N/A 2.4375 in
L2 N/A 8.0000 in


N/A 2.2656 in

No. of Base Bolts Required

N/A 4

Bolt Hole Length

N/A 1.6875 in

Bolt Hole Width

N/A 1.000 in

Size of Base Bolts Required

N/A 1 in


N/A AN26


N/A W26
Housing Only3 N/A SDAF226
Stabilizing Ring 1 Req’d4 N/A SR-26-0

Triple Seal 2 Req’d at S-2

N/A LOR136

Triple Seal 2 Req’d at S-3

N/A LOR122

Assembly Weight

N/A 151.000 lb

Full Timken Part Number

N/A SDAF22226
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
  • 4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.