3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
  • Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
  • To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22220).

Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
Unit of Measure

Specifications

Bearing Number

 N/A 22320

Diameter S-2

 N/A 4 1/2 in

Diameter S-3

 N/A 3 13/16 in

A

 N/A 5.2500 in

B

 N/A 16.5 in

C

 N/A 6.8750 in

D

 N/A 2.2500 in

E Max.

 N/A 14.5000 in

E Min.

 N/A 13.2500 in

F

 N/A 4.125 in
H1 N/A 10.5000 in

Oil Level K

 N/A 2.1250 in
L2 N/A 7.625 in

Y

 N/A 2.2969 in

No. of Base Bolts Required

 N/A 4

Bolt Hole Length

 N/A 1.5 in

Bolt Hole Width

 N/A 0.875 in

Size of Base Bolts Required

 N/A 0.875 in

Locknut

 N/A AN20

Lockwasher

 N/A W20
Housing Only3 N/A SDAF320
Stabilizing Ring 1 Req’d4 N/A SR-24-20

Triple Seal 2 Req’d at S-2

 N/A LOR118

Triple Seal 2 Req’d at S-3

 N/A LOR106

Assembly Weight

 N/A 109 lb

Full Timken Part Number

 N/A SDAF22320
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
  • 4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.