3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Batch CAD Cart (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 110 mm

Locknut

N/A AN 22

Lockwasher

N/A W 22

Threads

Major Diameter

N/A 109.86 mm4.325 in

Threads No. per Inch

N/A 12

Shaft

Relief Diameter A

N/A 106.73 mm4.202 in

Diameter S-3

N/A 106.36 mm4 3/16 in
W1 N/A 4.37 mm0.172 in
L2 N/A 19.05 mm0.750 in
H3 N/A 4.8 mm0.188 in
S4 N/A 9.53 mm0.375 in
M5 N/A 7.92 mm0.312 in

Locknut

C1

N/A 145.39 mm5.724 in

D

N/A 20.10 mm

Lockwasher

Q

N/A 2.92 mm0.115 in

R

N/A 111.63 mm4.395 in

B

N/A 154.00 mm6.063 in

s

N/A 8.97 mm0.353 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.