3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Batch CAD Cart (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 35 mm

Locknut

N/A N 07

Lockwasher

N/A W 07

Threads

Major Diameter

N/A 34.95 mm1.376 in

Threads No. per Inch

N/A 18

Shaft

Relief Diameter A

N/A 32.94 mm1.297 in

Diameter S-3

N/A 31.75 mm1 1/4 in
W1 N/A 2.77 mm0.109 in
L2 N/A 10.34 mm0.407 in
H3 N/A 2.4 mm0.094 in
S4 N/A 4.78 mm0.188 in
M5 N/A 3.18 mm0.125 in

Locknut

C1

N/A 52.53 mm2.068 in

D

N/A 11.40 mm

Lockwasher

Q

N/A 1.02 mm0.040 in

R

N/A 35.46 mm1.396 in

B

N/A 57.20 mm2.250 in

s

N/A 4.47 mm0.176 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.