All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Accessories - Locknut and Lockwasher > Part Number AN 15-W 15  

Part Number AN 15-W 15, Inch Accessories - Locknut and Lockwasher

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).




Specifications  · Threads  · Shaft  · Locknut  · Lockwasher

Specifications

Bearing Bore
75 mm

Locknut
AN 15

Lockwasher
W 15


Threads

Major Diameter
74.5 mm
2.933 in

Threads No. per Inch
12


Shaft

Relief Diameter A
71.37 mm
2.810 in

Diameter S-3
71.44 mm
2.8125 in

W1
4.37 mm
0.172 in

L2
13.49 mm
0.531 in

H3
3.2 mm
0.125 in

S4
7.92 mm
0.312 in

M5
6.35 mm
0.25 in
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)


Locknut

C1
98.55 mm
3.88 in

D
15.34 mm
0.604 in


Lockwasher

Q
1.57 mm
0.062 in

R
75.51 mm
2.973 in

B
104.37 mm
4.109 in

s
7.37 mm
0.29 in



 DOWNLOADS 

Metric Accessories Index
(PDF, 77KB)

Metric Accessories Prefixes and Suffixes
(PDF, 33KB)

Nomenclature
(PDF, 41KB)