All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Accessories - Locknut and Lockwasher > Part Number AN 17-W 17  

Part Number AN 17-W 17, Inch Accessories - Locknut and Lockwasher

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).




Specifications  · Threads  · Shaft  · Locknut  · Lockwasher

Specifications

Bearing Bore
85 mm

Locknut
AN 17

Lockwasher
W 17


Threads

Major Diameter
84.84 mm
3.34 in

Threads No. per Inch
12


Shaft

Relief Diameter A
81.71 mm
3.217 in

Diameter S-3
80.96 mm
3.1875 in

W1
4.37 mm
0.172 in

L2
14.27 mm
0.562 in

H3
3.2 mm
0.125 in

S4
9.53 mm
0.375 in

M5
6.35 mm
0.25 in
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)


Locknut

C1
112.04 mm
4.411 in

D
16.13 mm
0.635 in


Lockwasher

Q
1.57 mm
0.062 in

R
86.23 mm
3.395 in

B
117.48 mm
4.6250 in

s
8.97 mm
0.353 in



 DOWNLOADS 

Metric Accessories Index
(PDF, 77KB)

Metric Accessories Prefixes and Suffixes
(PDF, 33KB)

Nomenclature
(PDF, 41KB)