All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Accessories - Locknut and Lockwasher > Part Number AN 24-W 24  

Part Number AN 24-W 24, Inch Accessories - Locknut and Lockwasher

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).




Specifications  · Threads  · Shaft  · Locknut  · Lockwasher

Specifications

Bearing Bore
120 mm

Locknut
AN 24

Lockwasher
W 24


Threads

Major Diameter
119.79 mm
4.716 in

Threads No. per Inch
12


Shaft

Relief Diameter A
116.66 mm
4.593 in

Diameter S-3
115.89 mm
4.5625 in

W1
4.37 mm
0.172 in

L2
19.84 mm
0.781 in

H3
4.8 mm
0.188 in

S4
9.53 mm
0.375 in

M5
7.92 mm
0.312 in
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)


Locknut

C1
155.7 mm
6.13 in

D
20.9 mm
0.823 in


Lockwasher

Q
2.92 mm
0.115 in

R
121.95 mm
4.801 in

B
164.31 mm
6.469 in

s
8.97 mm
0.353 in



 DOWNLOADS 

Metric Accessories Index
(PDF, 77KB)

Metric Accessories Prefixes and Suffixes
(PDF, 33KB)

Nomenclature
(PDF, 41KB)