All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Accessories - Locknut and Lockwasher > Part Number AN 32-W 32  

Part Number AN 32-W 32, Inch Accessories - Locknut and Lockwasher

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).




Specifications  · Threads  · Shaft  · Locknut  · Lockwasher

Specifications

Bearing Bore
160 mm

Locknut
AN 32

Lockwasher
W 32


Threads

Major Diameter
159.61 mm
6.284 in

Threads No. per Inch
8


Shaft

Relief Diameter A
155.17 mm
6.109 in

Diameter S-3
153.99 mm
6 1/16 in

W1
4.37 mm
0.172 in

L2
26.19 mm
1.031 in

H3
6 mm
0.234 in

S4
15.88 mm
0.625 in

M5
9.53 mm
0.375 in
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)


Locknut

C1
204.93 mm
8.068 in

D
26.44 mm
1.041 in


Lockwasher

Q
3.71 mm
0.146 in

R
162.28 mm
6.389 in

B
214.33 mm
8.438 in

s
14.99 mm
0.59 in



 DOWNLOADS 

Metric Accessories Index
(PDF, 77KB)

Metric Accessories Prefixes and Suffixes
(PDF, 33KB)

Nomenclature
(PDF, 41KB)