All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Accessories - Locknut and Lockwasher > Part Number N 09-W 09  

Part Number N 09-W 09, Inch Accessories - Locknut and Lockwasher

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).




Specifications  · Threads  · Shaft  · Locknut  · Lockwasher

Specifications

Bearing Bore
45 mm

Locknut
N 09

Lockwasher
W 09


Threads

Major Diameter
44.88 mm
1.767 in

Threads No. per Inch
18


Shaft

Relief Diameter A
42.88 mm
1.688 in

Diameter S-3
42.86 mm
1.6875 in

W1
3.58 mm
0.141 in

L2
10.31 mm
0.406 in

H3
2.4 mm
0.094 in

S4
7.92 mm
0.312 in

M5
3.96 mm
0.156 in
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)


Locknut

C1
64.41 mm
2.536 in

D
11.38 mm
0.448 in


Lockwasher

Q
1.22 mm
0.048 in

R
45.52 mm
1.792 in

B
69.44 mm
2.734 in

s
7.37 mm
0.29 in



 DOWNLOADS 

Metric Accessories Index
(PDF, 77KB)

Metric Accessories Prefixes and Suffixes
(PDF, 33KB)

Nomenclature
(PDF, 41KB)