All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Accessories - Locknut and Lockwasher > Part Number N 10-W 10  

Part Number N 10-W 10, Inch Accessories - Locknut and Lockwasher

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).




Specifications  · Threads  · Shaft  · Locknut  · Lockwasher

Specifications

Bearing Bore
50 mm

Locknut
N 10

Lockwasher
W 10


Threads

Major Diameter
49.96 mm
1.967 in

Threads No. per Inch
18


Shaft

Relief Diameter A
47.96 mm
1.888 in

Diameter S-3
47.63 mm
1.875 in

W1
3.58 mm
0.141 in

L2
11.89 mm
0.468 in

H3
2.4 mm
0.094 in

S4
7.92 mm
0.312 in

M5
3.96 mm
0.156 in
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)


Locknut

C1
68.4 mm
2.693 in

D
12.95 mm
0.51 in


Lockwasher

Q
1.22 mm
0.048 in

R
50.6 mm
1.992 in

B
74.22 mm
2.922 in

s
7.37 mm
0.29 in



 DOWNLOADS 

Metric Accessories Index
(PDF, 77KB)

Metric Accessories Prefixes and Suffixes
(PDF, 33KB)

Nomenclature
(PDF, 41KB)