CAD (0)
▾
Key Features
-
• Longer bearing life achieved from higher capacity (vs. competitors)
-
• Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
-
• Improved bearing performance in extreme operating conditions, minimizing impact of contaminants that can get caught in the bearing's roller and cage due to an enhanced cage bridge design
-
• Extend bearing life in applications with extreme shock/vibration, high gravitational forces and minimal lubrication conditions due to the extra strength and durability provided by our machined brass cage
Unit of Measure
Key Dimensions
Bore (d) |
N/A 500 mm |
O.D. (D) |
N/A 830 mm32.6770 in |
Width (B) |
N/A 325 mm12.795 in |
Bore_Taper |
N/A 1/30 |
Dynamic Radial Load Rating - 1M Revs (C1) |
N/A 9660000 N2170000 lbf |
| e Factor1 | N/A 0.37 |
Other Dimensions
| Max Shaft Fillet Radius2 | N/A 6 mm0.24 in |
Shaft Backing Shoulder Diameter |
N/A 563.000 mm22.100 in |
Housing Backing Shoulder Diameter |
N/A 755.000 mm29.700 in |
Design Unit |
N/A Metric |
- 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 2 Maximum housing fillet radius that bearing corners will clear.
- 3 See thermal speed ratings in the engineering section.
- 4 These factors apply for both inch and metric calculations. See engineering
- 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 7 Geometry constant for Lubrication Life Adjustment Factor a3l.
