Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 50 mm

Lubrication Type

 N/A Industrial Grade Solid Lube

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Factors

Maximum Operating Speed

 N/A 1060 rpm
e - ISO Factor1 N/A 0.24
Y0 - ISO Factor2 N/A 2.76
Y1 - ISO Factor3 N/A 2.83
Y2 - ISO Factor4 N/A 4.21
Cg - Geometry Factor5 N/A 0.0549

Dimensions

D - Outer Diameter

 N/A 110 mm4.3307 in

B' - Inner Ring Width

 N/A 27 mm1.063 in

B - Outer Ring Width

 N/A 27 mm1.063 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius6 N/A 2 mm0.080 in
r - Outer Ring "To Clear" Radius7 N/A 2 mm0.080 in

da - Inner Ring Backing Diameter

 N/A 67.000 mm2.600 in

Da - Outer Ring Backing Diameter

 N/A 99.000 mm3.900 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 163000 N36700 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 151000 N33800 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 6 Maximum housing fillet radius that bearing corners will clear.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.