Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

90 mm

Bore_Taper

1/12

Cage Type

EM

Cage Material

Brass

Superseded Part

22218KYMW33

Dimensions

D - Outer Diameter

160 mm6.2992 in

B' - Inner Ring Width

40 mm1.5748 in

B - Outer Ring Width

40 mm1.5748 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 2 mm0.080 in
r - Outer Ring "To Clear" Radius2 2 mm0.080 in

da - Inner Ring Backing Diameter

105.000 mm4.2000 in

Da - Outer Ring Backing Diameter

146.000 mm5.800 in

Basic Load Ratings

C0 - Static Radial Rating

388000 N87200 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

355000 N79700 lbf

Factors

e - ISO Factor3 0.23
Y0 - ISO Factor4 2.83
Y1 - ISO Factor5 2.9
Y2 - ISO Factor6 4.31

Reference Thermal Speed Rating (Grease)

3500 rpm
Reference Thermal Speed Rating (Oil)7 4300 rpm
Cg - Geometry Factor8 0.0638
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.